We’re delighted to announce that our website has been translated into Italian and the new site is up and ready for use! Just select the Italian option in the languages section and all of our products, services and histories are available. Godere!
One of the downsides of using Silicone oils or emulsions as a release agent is that the material you’ve released from the mould canâ€™t be printed on or painted until the silicone oil has been cleaned off. The very nature of silicone oil, that itâ€™s a non-poler, slippy polymer, means that any paint or ink wouldn’t penetrate the layer of oil, or would mix in with it. DC 2418 emulsion not only allows printing and painting of post-moulded products, thanks to Ethylated Silicone oil (and some other ingredients) but as itâ€™s an emulsion, itâ€™s as easy to use as traditional Silicone Emulsions.
If youâ€™re interested in the specific properties of DC 2418, and itâ€™s possible uses, please get in touch.
After a busy few weeks, thanks to the tremendous interest generated by our stand at DKT, We’re happy to say that our venture to the European Technical Rubber Convention was a great success!
Highlighting the use of Rubber crumb and Granule in rubber compounds, without the loss of properties, Our unique FKM crumbing facility and the extremely small particle size we can generate was received with great interest. We were able to show, first hand, how fine our FKM powder can be made, thus increasing the amount you can add into your compounds and saving you considerable costs without any deterioration of FKM properties.
We’d like to extend a big thank you to everyone who can to visit our stand and we hope to continue providing technical knowledge and top quality products to all ourÂ clientele.