J. Allcock & Sons Ltd
Incorporating Wellington Rubber Co Ltd
+44 (0)161 223 7181
Recycling scrap rubber into reusuable material
Our on-site recycling is based on size reduction rubber recycling. Both J. Allcock & Sons and Wellington Rubber Company have proud history in this form of recycling.
How are rubber granules produced?
The incoming waste is identified and checked and is then progressively broken down in size by passing it through very high energy cutters and granulators. The granulators have a removable, perforated "basket" as the base and this can be changed as required. The full range of sizes runs from 2.5 to 30mm. The common, usual sizes would be 4 or 6mm, and larger chunks would "whirl" around inside, passing through the cutters again and again, until they were small enough to fall through the basket. Vibrating sieve units separate or grade the output. High strength magnets are used at every possible flow point to ensure that any residual metal particles are removed.
At this stage the material is known as "granules" and has a ready outlet in safety surfacing and the like. It is used in the same way as the stone "chips" in tarmac.
How is rubber crumb produced?
After the rubber has been reduced to granules they are ready to be turned into crumb. Our crumb is one of the best quality available and the exact production method is an industry secret.
J. Allcock & Sons supply:
Wellington Rubber Company supply: